The Cat® 950 Wheel Loader brings premium performance with simple-to-use technologies, helping to boost operator efficiencies and deliver consistent high bucket fill factors, resulting in highly efficient productivity. Long service intervals help to reduce your downtime. This machine is designed to meet emission standards without interrupting operation, delivering great performance, reliability, durability, and versatility, resulting in a machine that is built to meet your needs.
Financial Programs
- Downpayment>49%
- Period36 months
- Rate0%
%
Period
Leasing agreement amount
Payment type
Annuity
Monthly payment
/ month
Engine
- Engine Power - 2,100 rpm ISO 14396:2002
- 249 hp
- Engine Power - 2,100 rpm ISO 14396:2002
- 253 hp (metric)
- Engine Model
- Cat® C7.1
- Gross Power - 2,100 rpm SAE J1995:2014
- 253 hp
- Gross Power - 2,100 rpm SAE J1995:2014
- 257 hp (metric)
- Net Power - 2,100 rpm ISO 9249:2007, SAE J1349:2011
- 235 hp (metric)
- Engine Torque - 1,300 rpm ISO 14396:2002
- 908 lbf·ft
- Gross Torque - 1,300 rpm SAE J1995:2014
- 916 lbf·ft
- Net Torque - 1,300 rpm ISO 9249:2007, SAE J1349:2011
- 863 lbf·ft
- Displacement
- 427 in³
- Emissions
- Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2,014 emission standards.
- Biodiesel Capability
- Up to B20¹
- Note (1)
- The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
- Note (2)
- ¹Cat engines are compatible with diesel fuel blended with following lower carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidel
Weights
- Operating Weight
- 42,461 lb
- Note
- Weight based on a machine configuration with parallel lift Z-bar linkage, Bridgestone 23.5R25 VJT L3 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link™, front manual differential/open rear
Transmission
- Forward - 1
- 4.3 mile/h
- Forward - 2
- 7.5 mile/h
- Forward - 3
- 12 mile/h
- Forward - 4
- 16 mile/h
- Forward - 5
- 24.5 mile/h
- Reverse - 1
- 4.3 mile/h
- Reverse - 2
- 7.5 mile/h
- Reverse - 3
- 16 mile/h
- Note
- Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius.
Sound
- Operator Sound Pressure Level - ISO 6396:2008
- 70 dB(A)
- Exterior Sound Power Level - ISO 6395:2008
- 107 dB(A)
- Operator Sound Pressure Level - ISO 6396:2008 ¹
- 69 dB(A)
- Exterior Sound Power Level - ISO 6395:2008²
- 104 dB(A)
- Note (1)
- ¹Including countries that adopt the EU and UK Directives.
- Note (2)
- ²Exterior Sound Power Level - European Union Directive 2,000/14/EC and UK Noise Regulation 2,001 No. 1,701.
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1,430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons).
Operating Specifications
- Static Tipping Load - Full 40° Turn - With Tire Deflection
- 24,694 lb
- Static Tipping Load - Full 40° Turn - No Tire Deflection
- 26,369 lb
- Breakout Force
- 40,690 lbf
- Note (1)
- For a machine configuration as defined under “Weight.”
- Note (2)
- Full compliance to ISO 14,397-1:2,007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Service Refill Capacities
- Fuel Tank
- 68.6 gal (US)
- DEF Tank
- 4 gal (US)
- Cooling System
- 14.3 gal (US)
- Crankcase
- 5.5 gal (US)
- Transmission
- 11.4 gal (US)
- Differential - Final Drives - Front
- 11.4 gal (US)
- Differential - Final Drives - Rear
- 11.4 gal (US)
- Hydraulic Tank
- 25.6 gal (US)
Hydraulic System
- Implement System - Maximum Pump Output at 2,340 rpm
- 85 gal/min
- Implement System - Maximum Operating Pressure
- 4,250 psi
- Hydraulic Cycle Time - Total
- 9.1 s
Dimensions - Standard Lift
- Height - Top of Hood
- 8.83 ft
- Height - Top of ROPS
- 11.33 ft
- Ground Clearance
- 1.08 ft
- Wheel Base
- 10.92 ft
- Overall Length - Without Bucket
- 23.08 ft
- Hinge Pin Height at Carry Height
- 2 ft
- Hinge Pin Height at Maximum Lift
- 13.08 ft
- Lift Arm Clearance at Maximum Lift
- 10.67 ft
- Rack Back - Maximum Lift
- 59 °
- Rack Back - Carry Height
- 49 °
- Width over Tires (Loaded)
- 9.33 ft
- Tread Width
- 7 ft
- Note
- All dimensions are approximate and based on machine equipped with 3.1 m³ (4.1 yd³) general purpose bucket with BOCE and Bridgestone 23.5R25 VJT L3 radial tires.
Dimensions - High Lift
- Height - Top of Hood
- 8.83 ft
- Height - Top of ROPS
- 11.33 ft
- Ground Clearance
- 1.08 ft
- Wheel Base
- 10.92 ft
- Overall Length - Without Bucket
- 24.58 ft
- Hinge Pin Height at Carry Height
- 2.5 ft
- Hinge Pin Height at Maximum Lift
- 14.75 ft
- Lift Arm Clearance at Maximum Lift
- 11.92 ft
- Rack Back - Maximum Lift
- 56 °
- Rack Back - Carry Height
- 49 °
- Width over Tires (Loaded)
- 9.33 ft
- Tread Width
- 7 ft
- Note
- All dimensions are approximate and based on machine equipped with 3.1 m³ (4.1 yd³) general purpose bucket with BOCE and Bridgestone 23.5R25 VJT L3 radial tires.
Standard Equipment:
- Note
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- Electrical
- Lights: halogen, 4 work lights, 2 front roading lights with turn signals, 2 rearview lights
- Starting and charging system, 24V
- Starter, electric, heavy duty
- Hydraulics
- Steering system, load sensing with dedicated variable displacement piston pump
- Implement system, load sensing with variable displacement piston pump
- Oil sampling valves, Cat XT™ hoses
- Ride control, dual accumulators (Optional depending on region)
- Linkage
- Kickouts: lift and tilt
- Parallel Lift, Z-bar
- Monitoring System
- Primary touchscreen monitor (Cat Payload, quad screens, machine settings & messages)
- Front dash with analog gauges, LCD display, and warning lights
- Maintenance reminders
- Safety
- Visibility: mirrors, rearview camera
- Window cleaning platform, front
Optional Equipment:
- Note
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- Additional Equipment
- Guards: powertrain, crankcase, window glass, cylinders, rear
- Cat Autolube system
- Fenders, extensions or roading
- Toolbox
- Biodegradable hydraulic oil
- High-speed oil change system
- Rear cab access
- Electrical
- Cold start, 120V or 240V
- Lights: LED
- Hydraulics
- 3rd and 4th auxiliary functions with ride control
- Quick coupler control
- Linkage
- High Lift
- Monitoring System
- Tire Pressure Monitor
- Safety
- Cat Detect rear radar system
- Dedicated rearview screen
- Multiview (360°) vision system
- 4-point seat belt retractor
- Reversing strobe lights
- Seat belt monitoring beacon
- Secondary steering system, electrical (Standard depending on region)
- Wheel chocks
- Warning beacon
- Collision Warning System with Motion Inhibit and People Detection
- Special Configurations
- Corrosion resistant
- Auxiliary Counterweight
- Waste and industrial
- Forestry
- On-board Technologies
- Cat Payload for Trade (Available in Europe, Türkiye, Australia, and New Zealand. Country certifications vary. Contact your Cat dealer for more information.)
- Remote Control
Specifications
Engine
- Engine Power - 2,100 rpm ISO 14396:2002
- 249 hp
- Engine Power - 2,100 rpm ISO 14396:2002
- 253 hp (metric)
- Engine Model
- Cat® C7.1
- Gross Power - 2,100 rpm SAE J1995:2014
- 253 hp
- Gross Power - 2,100 rpm SAE J1995:2014
- 257 hp (metric)
- Net Power - 2,100 rpm ISO 9249:2007, SAE J1349:2011
- 235 hp (metric)
- Engine Torque - 1,300 rpm ISO 14396:2002
- 908 lbf·ft
- Gross Torque - 1,300 rpm SAE J1995:2014
- 916 lbf·ft
- Net Torque - 1,300 rpm ISO 9249:2007, SAE J1349:2011
- 863 lbf·ft
- Displacement
- 427 in³
- Emissions
- Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2,014 emission standards.
- Biodiesel Capability
- Up to B20¹
- Note (1)
- The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
- Note (2)
- ¹Cat engines are compatible with diesel fuel blended with following lower carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidel
Weights
- Operating Weight
- 42,461 lb
- Note
- Weight based on a machine configuration with parallel lift Z-bar linkage, Bridgestone 23.5R25 VJT L3 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link™, front manual differential/open rear
Transmission
- Forward - 1
- 4.3 mile/h
- Forward - 2
- 7.5 mile/h
- Forward - 3
- 12 mile/h
- Forward - 4
- 16 mile/h
- Forward - 5
- 24.5 mile/h
- Reverse - 1
- 4.3 mile/h
- Reverse - 2
- 7.5 mile/h
- Reverse - 3
- 16 mile/h
- Note
- Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius.
Sound
- Operator Sound Pressure Level - ISO 6396:2008
- 70 dB(A)
- Exterior Sound Power Level - ISO 6395:2008
- 107 dB(A)
- Operator Sound Pressure Level - ISO 6396:2008 ¹
- 69 dB(A)
- Exterior Sound Power Level - ISO 6395:2008²
- 104 dB(A)
- Note (1)
- ¹Including countries that adopt the EU and UK Directives.
- Note (2)
- ²Exterior Sound Power Level - European Union Directive 2,000/14/EC and UK Noise Regulation 2,001 No. 1,701.
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1,430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons).
Operating Specifications
- Static Tipping Load - Full 40° Turn - With Tire Deflection
- 24,694 lb
- Static Tipping Load - Full 40° Turn - No Tire Deflection
- 26,369 lb
- Breakout Force
- 40,690 lbf
- Note (1)
- For a machine configuration as defined under “Weight.”
- Note (2)
- Full compliance to ISO 14,397-1:2,007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Service Refill Capacities
- Fuel Tank
- 68.6 gal (US)
- DEF Tank
- 4 gal (US)
- Cooling System
- 14.3 gal (US)
- Crankcase
- 5.5 gal (US)
- Transmission
- 11.4 gal (US)
- Differential - Final Drives - Front
- 11.4 gal (US)
- Differential - Final Drives - Rear
- 11.4 gal (US)
- Hydraulic Tank
- 25.6 gal (US)
Hydraulic System
- Implement System - Maximum Pump Output at 2,340 rpm
- 85 gal/min
- Implement System - Maximum Operating Pressure
- 4,250 psi
- Hydraulic Cycle Time - Total
- 9.1 s
Dimensions - Standard Lift
- Height - Top of Hood
- 8.83 ft
- Height - Top of ROPS
- 11.33 ft
- Ground Clearance
- 1.08 ft
- Wheel Base
- 10.92 ft
- Overall Length - Without Bucket
- 23.08 ft
- Hinge Pin Height at Carry Height
- 2 ft
- Hinge Pin Height at Maximum Lift
- 13.08 ft
- Lift Arm Clearance at Maximum Lift
- 10.67 ft
- Rack Back - Maximum Lift
- 59 °
- Rack Back - Carry Height
- 49 °
- Width over Tires (Loaded)
- 9.33 ft
- Tread Width
- 7 ft
- Note
- All dimensions are approximate and based on machine equipped with 3.1 m³ (4.1 yd³) general purpose bucket with BOCE and Bridgestone 23.5R25 VJT L3 radial tires.
Dimensions - High Lift
- Height - Top of Hood
- 8.83 ft
- Height - Top of ROPS
- 11.33 ft
- Ground Clearance
- 1.08 ft
- Wheel Base
- 10.92 ft
- Overall Length - Without Bucket
- 24.58 ft
- Hinge Pin Height at Carry Height
- 2.5 ft
- Hinge Pin Height at Maximum Lift
- 14.75 ft
- Lift Arm Clearance at Maximum Lift
- 11.92 ft
- Rack Back - Maximum Lift
- 56 °
- Rack Back - Carry Height
- 49 °
- Width over Tires (Loaded)
- 9.33 ft
- Tread Width
- 7 ft
- Note
- All dimensions are approximate and based on machine equipped with 3.1 m³ (4.1 yd³) general purpose bucket with BOCE and Bridgestone 23.5R25 VJT L3 radial tires.
Standard/Optional Features
Standard Equipment:
- Note
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- Electrical
- Lights: halogen, 4 work lights, 2 front roading lights with turn signals, 2 rearview lights
- Starting and charging system, 24V
- Starter, electric, heavy duty
- Hydraulics
- Steering system, load sensing with dedicated variable displacement piston pump
- Implement system, load sensing with variable displacement piston pump
- Oil sampling valves, Cat XT™ hoses
- Ride control, dual accumulators (Optional depending on region)
- Linkage
- Kickouts: lift and tilt
- Parallel Lift, Z-bar
- Monitoring System
- Primary touchscreen monitor (Cat Payload, quad screens, machine settings & messages)
- Front dash with analog gauges, LCD display, and warning lights
- Maintenance reminders
- Safety
- Visibility: mirrors, rearview camera
- Window cleaning platform, front
Optional Equipment:
- Note
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- Additional Equipment
- Guards: powertrain, crankcase, window glass, cylinders, rear
- Cat Autolube system
- Fenders, extensions or roading
- Toolbox
- Biodegradable hydraulic oil
- High-speed oil change system
- Rear cab access
- Electrical
- Cold start, 120V or 240V
- Lights: LED
- Hydraulics
- 3rd and 4th auxiliary functions with ride control
- Quick coupler control
- Linkage
- High Lift
- Monitoring System
- Tire Pressure Monitor
- Safety
- Cat Detect rear radar system
- Dedicated rearview screen
- Multiview (360°) vision system
- 4-point seat belt retractor
- Reversing strobe lights
- Seat belt monitoring beacon
- Secondary steering system, electrical (Standard depending on region)
- Wheel chocks
- Warning beacon
- Collision Warning System with Motion Inhibit and People Detection
- Special Configurations
- Corrosion resistant
- Auxiliary Counterweight
- Waste and industrial
- Forestry
- On-board Technologies
- Cat Payload for Trade (Available in Europe, Türkiye, Australia, and New Zealand. Country certifications vary. Contact your Cat dealer for more information.)
- Remote Control