The line of G3500 engines brings versatility, uptime, and low operating cost to your gas compression operation. They are equipped with ADEM A3 technology that enables highest performance and safety while maintaining low emissions. Ideal applications for G3500 engines include gas lift, gas gathering, and wellhead gas compression. The Cat G3516J gas engines are rated at 1029 bkW (1380 bhp) @ 1400 rpm and 1119 bkW (1500 bhp) @ 1400 rpm and are NSPS site compliant capable with customer-provided aftertreatment.
Financial Programs
- Downpayment>49%
- Period36 months
- Rate0%
Engine Specifications
- Maximum Rating
- 1,500 BHP
- Rated Speed
- 1,400 rpm
- Emissions
- Lean Burn: EPA NSPS Site Compliant Capable with Customer Supplied Aftertreatment, 0.3 g and 0.5 g/bhp-hr NOx
- Minimum Rating
- 1,380 BHP
- Displacement
- 4,211 in³
- Aspiration
- Turbocharged - 2 Stage Aftercooled
- Flywheel and Flywheel Housing
- Counterclockwise
- Oil Change Interval
- 2,000 hours
- Stroke
- 7.5 in
- Bore
- 6.7 in
- Combustion
- Lean Burn
- Governor
- Electronic (ADEM A3)
- Lube Oil System
- 423 L (112 gal)
Standard Equipment:
- Air Inlet System
- Round air inlet adapter
- Single element canister type with service indicator
- Cooling System
- Two-stage charge air cooling system
- Engine cooling and charge air cooling thermostats
- Exhaust System
- Watercooled exhaust manifolds
- Dry Turbocharger housings
- Water-cooled exhaust elbow
- Fuel System
- 7-40 psig gas supply
- Electronic fuel metering valve
- Gas pressure regulator
- Gas shutoff valve
- Fuel System
- Instrumentation
- 8 inch HMI Engine Control Panel
- Interconnect harness
- Lubrication System
- Crankcase breather — top mounted
- Oil sampling valve
- Deep sump oil pan
- Oil sampling valve
- Turbo oil accumulator
- Protection System
- Gas shutoff valve
- Power Take Offs
- Front housing, two sided
Optional Equipment:
- Charging Ssytem
- Alternator
- Charging System
- Upper RH Accessory Drive
- General
- Language Decals
- Lube System
- Air Prelube Pump
- Lubricating Oil
- Oil Drain
- Oil filter
- Oil Pan
- Lubrication System
- Air prelube pump
- Lubricating oil
- Oil pan drain
- Protection System
- Explosion relief valves
- Starting System
- 90 psi starter
- 150 psi starter
Specifications
Engine Specifications
- Maximum Rating
- 1,500 BHP
- Rated Speed
- 1,400 rpm
- Emissions
- Lean Burn: EPA NSPS Site Compliant Capable with Customer Supplied Aftertreatment, 0.3 g and 0.5 g/bhp-hr NOx
- Minimum Rating
- 1,380 BHP
- Displacement
- 4,211 in³
- Aspiration
- Turbocharged - 2 Stage Aftercooled
- Flywheel and Flywheel Housing
- Counterclockwise
- Oil Change Interval
- 2,000 hours
- Stroke
- 7.5 in
- Bore
- 6.7 in
- Combustion
- Lean Burn
- Governor
- Electronic (ADEM A3)
- Lube Oil System
- 423 L (112 gal)
Standard/Optional Features
Standard Equipment:
- Air Inlet System
- Round air inlet adapter
- Single element canister type with service indicator
- Cooling System
- Two-stage charge air cooling system
- Engine cooling and charge air cooling thermostats
- Exhaust System
- Watercooled exhaust manifolds
- Dry Turbocharger housings
- Water-cooled exhaust elbow
- Fuel System
- 7-40 psig gas supply
- Electronic fuel metering valve
- Gas pressure regulator
- Gas shutoff valve
- Fuel System
- Instrumentation
- 8 inch HMI Engine Control Panel
- Interconnect harness
- Lubrication System
- Crankcase breather — top mounted
- Oil sampling valve
- Deep sump oil pan
- Oil sampling valve
- Turbo oil accumulator
- Protection System
- Gas shutoff valve
- Power Take Offs
- Front housing, two sided
Optional Equipment:
- Charging Ssytem
- Alternator
- Charging System
- Upper RH Accessory Drive
- General
- Language Decals
- Lube System
- Air Prelube Pump
- Lubricating Oil
- Oil Drain
- Oil filter
- Oil Pan
- Lubrication System
- Air prelube pump
- Lubricating oil
- Oil pan drain
- Protection System
- Explosion relief valves
- Starting System
- 90 psi starter
- 150 psi starter